Uncategorized – Page 41

Ion Exchange Chromatography is of two types Cation Exchange chromatography and Anion Exchange Chromatography Cation Exchange Matrix will have -vely charged particles, Anion Exchange Matrix will have +vely charged particles Principle: At isoelectric point (pI) net charge of the protein will be zero. when the pH of the protein is reduced below its pI it becomes positively charged, and if the pH of protein is raised above its pI value it becomes negatively charged. MechanismTo optimize binding of all charged molecules, the mobile phase is generally a low to medium conductivity (i.e., low to medium salt concentration) solution.The adsorption of the molecules to the solid support is driven by the ionic interaction between the oppositely charged ionic groups in the sample molecule and in the functional ligand on the support. The strength of the interaction is determined by the number and location of the charges on the molecule and on the functional group.By increasing the salt concentration (generally by using a linear salt gradient) the molecules with the weakest ionic interactions start to elute from the column first. Molecules that have a stronger ionic interaction require a higher salt concentration and elute later in the gradient. The binding capacities of ion exchange resins are generally quite high. This is of major importance in process scale chromatography, but is not critical for analytical scale separations. Ion Exchange Chromatography Principle - Image Source Separation of molecules by ion-exchange (IEX) chromatography relies on differences between the net surface charges on the solute molecules. Proteins, for example, contain numerous groups which can ionize to varying extents depending on the pH of the solution. The ionic state of these groups is highly dependent on the pH, and as a result, the net surface charge of a protein will undergo a change as the pH of their environment varies. At the isoelectric point (pI) of the protein, the protein will have little or no tendency to bind either to a cationic stationary phase (that is, one which has positively charged groups) or to an anionic stationary phase (one that has negatively charged groups). At pH value below the pI, the protein will have a net positive charge, and will tend to bind reversibly with to the surface of a cation-exchange resin, that is, one that has negatively charged groups at that pH. Note that a cation-exchange resin is anionic, having negatively charged groups, while an anion exchange resin is cationic, since it has positively charged groups. Binding to the matrix requires that buffer ions that are bound to the matrix during the equilibration process be displaced by the solutes of interest. Thus, and exchange of ions takes place at the surface of the matrix. On applying the sample, conditions are chosen so that as many as possible of the unwanted solutes do not bind to the resin, leaving the molecules of interest bound to the top of the column. When all the unwanted solutes have been eluted, the composition of the buffer is gradually altered, either by increasing the ionic strength, Γ , or, less commonly, by changing the pH of the eluting buffer. This process is called gradient elution. The bound solutes are eluted at different values of the ionic strength, as buffer ions compete with the bound molecule for cationic or anionic sites on the resin. You might also be interested in Protein Purification: Principles, High Resolution Methods, and Applications by Jan-Christer Janson, Wiley Publishers, Leading experts in the field cover all major biochemical separation methods for proteins in use today, providing professionals in biochemistry, organic chemistry, and analytical chemistry with quick access to the latest techniques Matrix Materials here is a variety of commercially available materials which can be classified as follows: Anion exchangers Type Functional group Quaternary ammonium (Q) Strong -OCH2N+(CH3)3 Diethylaminoethyl (DEAE) Weak -OCH2CH2NH+(CH2CH3)2 Diethylaminopropyl (ANX) Weak -OCH2CHOHCH2NH+(CH2CH3)2 Cation exchangers Type Functional group Sulfopropyl (SP) Strong O-CH2CHOHCH2OCH2CH2CH2SO3– Methyl sulfonate (S) Strong O-CH2CHOHCH2OCH2CHOHCH2SO3– Carboxymethyl (CM) Weak O-CH2COO– Strong ion-exchangers do not show any marked change in their ionic states with changes in pH. They remain fully charged over a broad range of pH values. Advantages of strong ion-exchangers: the development and optimization of separations is fast and easy since the charge characteristics of the medium do not change with pH; the mechanism of interaction is simple since there are no intermediate forms of charge interaction; sample loading (binding) capacity is maintained at high or low pH since there is no loss of charge from the ion exchanger. Most proteins can be separated on either strong or weak ion-exchangers. If strong ion-exchangers do not give the required results, try a weak exchanger. These offer a different seletcivity to strong exchangers, but their exchange capacity changes with pH. If the elution process is carried out using the same buffer that was used in applying the sample, the elution is said to be ISOCRATIC. Alternately, the elution may be carried out for a while with that buffer, and then with another buffer. This is called STEP-WISE ELUTION. For the best results, the composition of the eluting buffer is changed as the elution progresses. The change is usually a change in ionic strength, from a less dilute to a more concentrated buffer, or, less frequently, a change in pH. This elution process is called GRADIENT ELUTION, and this generally gives a much better separation of solute. Got something to say about this post? Leave a comment...your comments are valuable for improving the posts.

Category: Uncategorized

Ion Exchange Chromatography Principle

Hydrophobic Interaction Chromatography Principle

Artificial Blood and Controversy

Enzyme used in Fruit Juice Industry

Gateway Cloning